03_05
03_06
Engine start up (03_05, 03_06)
Engine ignition (gasoline version)
Open the fuel cock «A» (turn it counter clockwise to open and clockwise to close).
With cold engine, pull the starter lever «C» and insert the start key into the key switch,
then turn it to position 2 and at the same time press the accelerator control.
After start up, release the key that will automatically return to position 1.
WARNING
EXHAUST GASES ARE TOXIC. DO NOT START THE ENGINE IN A CLOSED
PLACE.
WHEN THE ENGINE IS ON, DO NOT HANDLE PARTS AND CONNECTIONS OF
THE ELECTRIC SYSTEM, ESPECIALLY THE SPARK PLUG CABLE.
03_07
Engine start up (03_06, 03_07)
Engine ignition (diesel version)
Introduce the start key into the switch and move it to position 1. On the instrument
panel, the glow plug preheat indicator will light up. The hotter the engine, the sooner
the indicator will turn off. Then move the key to position 2 while pressing the acceler-
ator control at the same time. After start up, release the key that will automatically
return to position 1.
19
To Next Page
Loading...
