12_01
12_02
Wheel replacement (12_01, 12_02)
The tyre replacement operation and the use of jack require some precautions which
are given below.
WARNING
SIGNAL THE PRESENCE OF THE VEHICLE AS PRESCRIBED BY THE HIGHWAY
CODE IN FORCE.
PLACE THE JACK IN THE POSITIONS SHOWN SO AS NOT TO DAMAGE ME-
CHANICAL PARTS OR THE BODY
WARNING
WHENEVER POSSIBLE, REPLACE TYRES WITH THE VEHICLE ON LEVEL
GROUND. IF THE GROUND IS SLOPING OR BADLY SURFACED, PUT WEDGES
OR ANY OTHER SUITABLE MATERIAL UNDER THE WHEELS TO BLOCK THE
VEHICLE. DO NOT GREASE BOLT THREADS BEFORE REFITTING: THEY
COULD COME UNDONE SPONTANEOUSLY.
NEVER TAMPER WITH THE INFLATION VALVE. DO NOT PLACE TOOLS BE-
TWEEN RIM AND TYRE.
Maintenance instructions
They are located into the compartment, below the seat.
72
To Next Page
Loading...
