PIAGGIO Beverly 300ie User Manual

02_02
Tyre pressure (02_02)
Check tyre pressure and wear periodically as indicated in the scheduled maintenance
table. Tyres feature wear indicators; replace tyres as soon as these indicators become
visible on the tyre tread. Also check that the tyres do not show signs of splitting at the
sides or irregular tread wear; if this occurs, go to an authorised workshop or at least
to a workshop equipped to replace tyres.
CAUTION
TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.
TYRES MUST BE REPLACED WHEN THE TREAD REACHES THE WEAR LIMITS
SET FORTH BY LAW.
TYRE INFLATION PRESSURE
Front tyre pressure (with
passenger)
2.2 bar (2.2 bar)
Rear tyre pressure (with
passenger)
2.4 bar (2.6 bar)
TYRES
Front tyre 110/70 - Tubeless 16" 52S or 52P
Rear tyre 140/70 - Tubeless 14" 68P or 68S
28
2 Use

PIAGGIO Beverly 300ie Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	278 cc
Cooling System	Liquid-cooled
Fuel System	Electronic fuel injection
Front Suspension	Hydraulic telescopic fork
Rear Suspension	Dual hydraulic shock absorbers
Rear Brake	240 mm disc
ABS	Yes
Seat Height	790 mm
Fuel Capacity	12 liters
Width	780 mm
Max Torque	22.5 Nm @ 5, 750 rpm
Transmission	CVT
Top Speed	125 km/h