EasyManuals Logo

PIAGGIO Beverly 300ie User Manual

PIAGGIO Beverly 300ie
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
02_06
02_07
02_08
Starting up the engine (02_06, 02_07, 02_08)
The vehicle is equipped with an ignition prevention system controlled by the side
stand.
The engine cannot be started if the side stand is lowered.
If the engine is on, it will turn itself off if the side stand is lowered.
To start the engine it is necessary, before pressing the starter button, to pull and keep
pulled the front or rear brake lever, which activates the appropriate switch allowing
start-up.
- Rest the vehicle on its centre stand, making sure that the rear wheel is not touching
the ground.
- Keep the throttle grip at idle speed.
- Insert the key into the ignition switch «A» and turn it to «ON».
- Make sure that the emergency stop switch «B» is in position «RUN» and the side
stand is up and not engaged.
- Pull either the front, «C» or rear «D» brake lever and then press the starter button
«E».
WARNING
THE AUTOMATIC TRANSMISSION MAKES THE REAR WHEEL TURN EVEN
WHEN THE THROTTLE GRIP IS SLIGHTLY TWISTED. RELEASE THE BRAKE
CAREFULLY AFTER STARTING, AND THEN ACCELERATE GRADUALLY.
CAUTION
DO NOT START-UP THE ENGINE IN CLOSED AREAS BECAUSE EXHAUST
GASES ARE TOXIC.
31
2 Use

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PIAGGIO Beverly 300ie and is the answer not in the manual?

PIAGGIO Beverly 300ie Specifications

General IconGeneral
Engine TypeSingle-cylinder, 4-stroke
Displacement278 cc
Cooling SystemLiquid-cooled
Fuel SystemElectronic fuel injection
Front SuspensionHydraulic telescopic fork
Rear SuspensionDual hydraulic shock absorbers
Rear Brake240 mm disc
ABSYes
Seat Height790 mm
Fuel Capacity12 liters
Width780 mm
Max Torque22.5 Nm @ 5, 750 rpm
TransmissionCVT
Top Speed125 km/h

Related product manuals