pico Technology PicoScope 2000 Series Programmer's Guide

Driver error codes
62Copyright © 2006–2022 Pico Technology Ltd. All rights reserved.ps2000pg.en-12
PicoScope 2000 Series Programmer's Guide
7 Driver error codes
Code
Name
Description
0
PS2000_OK
The oscilloscope is functioning correctly.
1
PS2000_MAX_UNITS_OPENED
Attempts have been made to open more than
PS2000_MAX_UNITS oscilloscopes.
2
PS2000_MEM_FAIL
Not enough memory could be allocated on the
host machine.
3
PS2000_NOT_FOUND
An oscilloscope could not be found.
4
PS2000_FW_FAIL
Unable to download firmware.
5
PS2000_NOT_RESPONDING
The oscilloscope is not responding to commands
from the PC.
6
PS2000_CONFIG_FAIL
The configuration information in the oscilloscope
has become corrupt or is missing.
7
PS2000_OS_NOT_SUPPORTED
The operating system is not supported by this
driver.

pico Technology PicoScope 2000 Series Specifications

General

Brand	pico Technology
Model	PicoScope 2000 Series
Category	Test Equipment
Language	English