Pierce HUSKY 3 - 2-2.2 F INLINEF; 2-2.2 G PICK -U P

GENERAL
2-10 / Husky 3 Foam System
© 2022 Pierce Manufacturing Inc. All Rights Reserved.
2-2.2f Inline Foam Strainer
Figure 2-11: Inline Foam Strainer
1321
The Inline Foam Strainer is located before the inlet to the foam pump and screens all foam and flush water before
it enters the foam pump. The strainer is used to prevent any debris from entering the foam system and possibly
interfering with the internal foam pump check valves. The strainer contains a removable 20-mesh screen. The
strainer will be mounted in an accessible service area.
2-2.2g Pick-Up Hose
Figure 2-12: Pick-up Hose
1324, 1323
A 3/4 in. flexible hose, with an end for insertion into foam containers, is provided. The hose has a 3/4 in. female
swivel garden hose thread swivel connector. (The hose is part of loose equipment.)