Pilz myPNOZ - Simulate Configuration

Configure myPNOZ with myPNOZ Creator
Getting started Modular safety relay,myPNOZ
1005615-EN-02
| 10
} Zone 2:
– Global E-STOP function
Monitored start with rising and falling edge
with test pulse evaluation for detection of shorts across contacts
– Safety gate input function (SG2),
Monitored start with rising and falling edge
with test pulse evaluation for detection of shorts across contacts
– 2 semiconductor outputs, instantaneous
Simulate configuration
A simulation can then be started for test purposes, during which the potential interactions
can be simulated.
Click on an input in simulation view and the switching outputs will be highlighted.