Need help?Do you have a question about the Pilz myPNOZ and is the answer not in the manual?
General| Input voltage | 24 V DC |
|---|---|
| Supply voltage | 24 V DC |
| Connection type | Screw terminals |
| PL | PL e |
| Protection Class | IP20 |
| Product type | Safety Relay |
| Number of Safety Channels | 2 |
| Operating Voltage | 24 V DC |
| Safety inputs | 2 |
| Category | 4 |
| Safety Category | 4 |
| Standards | EN ISO 13849-1 |
| Operating Temperature | -20 - 55 °C |
| Storage Temperature | -25°C to +70°C |
| SIL | SIL 3 |
Describes the machine-wide emergency stop using E-STOP pushbuttons.
Details safety measures for Zone 1, including safety gate and light curtain.
Explains safety measures for Zone 2, focusing on the safety switch for the hatch.
Outlines mapping safety functions and logic connections using the web application.
Explains how to simulate potential interactions of the logic configuration for testing.
Maps the logic structure to the hardware system and details necessary modules.
Covers displaying, saving, sharing, creating PDFs, and ordering the myPNOZ configuration.
Explains LED status messages during initialization and operation.
Details various error messages, their causes, and suggested remedies.
Describes malfunctions related to relay contacts and delayed outputs.
To Next Page
