Pilz myPNOZ - Page 12

Configure myPNOZ with myPNOZ Creator
Getting started Modular safety relay,myPNOZ
1005615-EN-02
| 12
The head module and expansion modules are connected in the above sequence using the
bus connectors. Through this sequence, the input on the head module is AND-liked to the
inputs on the expansion module PNOZ yi1. The link affects the safe relay output on the ex-
pansion module PNOZ yo2. Likewise, the input on the head module is AND-linked to the in-
put on the expansion module PNOZ yio1 and affects the safe semiconductor output on the
PNOZ yio1.
You can check the settings of the rotary switch for the start type
Monitored start
with rising and falling edge
with test pulse evaluation
Monitored start
with rising and falling edge
with test pulse evaluation
Monitored start
with rising and falling edge
without test pulse evaluation