Pilz PNOZ e1vp - Page 32

PNOZ e1vp
Operating Manual PNOZ e1vp
21236-EN-06
32
Electrical data 774132 784132
Supply voltage
Voltage 24 V 24 V
Kind DC DC
Voltage tolerance -20 %/+25 % -20 %/+25 %
Output of external power supply
(DC) at no load 2 W 2 W
Residual ripple DC 20 % 20 %
Duty cycle 100 % 100 %
External unit fuse protection F1
max. 6 A slow/10 A quick 6 A slow/10 A quick
Inputs 774132 784132
Voltage at
Input circuit DC 24 V 24 V
Start circuit DC 24 V 24 V
Feedback loop DC 24 V 24 V
Logic input 24 V 24 V
Current at
Input circuit DC 5 mA 5 mA
Start circuit DC 5 mA 5 mA
Feedback loop DC 5 mA 5 mA
Logic input 5 mA 5 mA
Min. input resistance at power-on 3.780 Ohm 3.780 Ohm
Max. overall cable resistance Rl-
max
Start circuit and feedback loop 1.000 Ohm 1.000 Ohm
Input circuit, single-channel 1.000 Ohm 1.000 Ohm
Input circuit, dual-channel 2.000 Ohm 2.000 Ohm
Max. line capacitance 450 nF 450 nF
Semiconductor outputs 774132 784132
Overall performance ext. loading,
semiconductor 130 W 130 W
Number of safety outputs
Delayed 1 1
Instantaneous 1 1
Number of auxiliary outputs 1 1
Number of test pulse outputs 2 2
Switching capability, 2 safety out-
puts under load
Current at UB ≤ 26.5 V 2 A 2 A
Current at UB > 26,5 V 1,5 A 1,5 A
Power at UB ≤ 26.5 V 50 W 50 W
Power at UB > 26,5 V 45 W 45 W