Pilz PNOZ m ES Profinet - Interface Assignment; Preparing for Operation; Download Modified Project to the Pnozmulti Safety System; Set IP Address

Commissioning
OperatingManualPNOZmESProfinet
1003386EN02
16
6.3 Interfaceassignment
RJ45socket
8pin PIN Standard
8 1
1 TD+(Transmit+)
2 TD(Transmit)
3 RD+(Receive+)
4 n.c.
5 n.c.
6 RD(Receive)
7 n.c.
8 n.c.
n.c.:Notconnected
6.4 Preparingforoperation
6.4.1 DownloadmodifiedprojecttothePNOZmultisafetysystem
Assoonasanadditionalexpansionmodulehasbeenconnectedtothesystem,theproject
mustbeamendedusingthePNOZmultiConfigurator.Proceedasdescribedintheoperat
inginstructionsforthebaseunit.
NOTICE
Forthecommissioningandaftereveryprogramchange,youmustcheck
whetherthesafetydevicesarefunctioningcorrectly.
6.4.2 SetIPaddress
Therearetwooptions:
} AutomaticassignmentoftheIPaddresswiththeDynamicHostConfigurationProtocol
(DHCP)
} AssignmentoftheIPaddressbytheIOcontrollerbeforesystemstartupbasedonthe
uniqueunitname.
6.4.3 InstallGSDLMfile
InstalltheGDSMLfile.YoucanfindtheGSDMLfileintheInternetatwww.pilz.de.