PNOZ s3
Operating Manual PNOZ s3
21395-EN-10
15
Mechanical data 750103 751103
Mounting position Any Any
Mechanical life 10,000,000 cycles 10,000,000 cycles
Material
Bottom PC PC
Front PC PC
Top PC PC
Cross section of external conduc-
tors with screw terminals
1 core flexible 0,25 - 2,50 mm², 24 - 12 AWG –
2 core with the same cross sec-
tion, flexible with crimp connec-
tors, no plastic sleeve
0,25 - 1,00 mm², 24 - 16 AWG –
2 core with the same cross sec-
tion, flexible without crimp con-
nectors or with TWIN crimp con-
nectors
0,20 - 1,50 mm², 24 - 16 AWG –
Torque setting with screw terminals 0,50 Nm –
Connection type Screw terminal Spring-loaded terminal
Mounting type plug in plug in
Cross section of external conduc-
tors with spring-loaded terminals:
flexible with/without crimp connec-
tor
– 0,20 - 2,50 mm², 24 - 12 AWG
Spring-loaded terminals: Terminal
points per connection
– 2
Stripping length – 9 mm
Dimensions
Height 98,0 mm 100,0 mm
Width 17,5 mm 17,5 mm
Depth 120,0 mm 120,0 mm
Weight 140 g 140 g
The standards current on 2009-12 apply.
Safety characteristic data
Operating
mode
EN ISO
13849-1:
2006
PL
EN ISO
13849-1:
2006
Category
EN IEC
62061
SIL CL
EN IEC
62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
13849-1:
2006
T
M
[year]
Safety con-
tacts, instan-
taneous
PL e Cat. 4 SIL CL 3 2,31E-09 SIL 3 2,03E-06 20
All the units used within a safety function must be considered when calculating the safety
characteristic data.
To Next Page
Loading...
