Pilz PSS WIN-PRO - Creating a Backup Copy

5-4
Functions
PSS WIN-PRO Service Version: Getting Started
Create backup copy
The linked program from the programmable safety system can be
uploaded and stored. This backup copy cannot be edited. However, it can
be downloaded again to a PSS.
The backup copy of the FS program is created in FS mode and the backup
copy of the ST program in ST mode.
1. Connect computer
Connect your computer to the PSS (see also “Connect computer to
PSS”).
2. Set the Mode
Switch to FS mode if you wish to create a backup copy of the FS pro-
gram or ST mode if you wish to make a backup copy of the ST pro-
gram.
3. Start upload
Select PSS -> Create Backup Copy .
The process is documented in the information window under the
Upload tab. If the information window is not displayed, select View ->
Information Window .
4. Enter storage location
Enter the path and name under which the backup copy is to be stored.