Pilz PSS WIN-PRO - Download ST Program

5-6
Functions
PSS WIN-PRO Service Version: Getting Started
Download ST program
1. Connect computer
Connect your computer to the PSS (see also “Connect computer to
PSS”).
2. Switch to ST mode
3. Set ST selector switch
The ST selector switch must be set to AUTO PG or PG to enable PSS
WIN-PRO to write to the PSS.
Set the ST selector switch on the PSS to AUTO PG or PG.
4. Start download
Select PSS -> Download Backup Copy -> PSS
The process is documented in the information window under the
Download tab. If the information window is not displayed, select View
-> Information Window .
5. Start ST section
Set the ST selector switch on the PSS to SPS or start the ST section
via PSS WIN-PRO (see “Start/Stop PSS” in online help).