Pilz PSS WIN-PRO - Downloading a Program to PSS

5-5
PSS WIN-PRO Service Version: Getting Started
Download program to PSS
The following section describes how to download a program to the PSS.
Please note:
The linked FS program is downloaded in FS mode and the linked ST pro-
gram in ST mode.
Download FS program
1. Connect computer
Connect your computer to the PSS (see also “Connect computer to
PSS”).
2. Switch to FS mode
3. Stop FS section
Set the FS selector switch on the PSS to STOP or stop the FS section
via PSS WIN-PRO (see “Start/Stop PSS” in online help).
4. Start download
Select PSS -> Download Backup Copy -> PSS
5. Enter password
Enter the password that entitles you to download.
INFORMATION
The default password is “pss3000” (lower case).
The information window on the Download tab documents the process.
If the information window is not displayed, select View -> Information
Window .
6. Start FS section
Set the FS selector switch on the PSS to RUN or start the FS section
via PSS WIN-PRO (see “Start/Stop PSS” in online help).