Pima Captain 8 User Manual

Hunter-Pro 832/8144 & Captain 8 User Guide
25
You can make the user enter its code, when it disarms the system using an RFID device - see
parameter “W” in section 9.4, on page 21.
9.10 How to delete RFID device
To delete an RFID device that is assign to a user, do the following:
1. Enter the user menu and press
2. Enter a user no. and press
3. Press x9
4. Press
5. Press
9.11 How to set the Duress code
For details on the Duress code, see section 2.2.1, on page 9.
To set the code, do the following:
1. Enter the user menu and press X2
2. Press
3. Enter a 4-6 digit code
4. Press to save
Hint: you can use your user code as the duress code, only switch around the
two last digits
9.12 How to set the Short code
The Short code is a 2-digit arming only code. When you enter the code, the Exit delay starts and
the alarm system is armed. To set the Short code:
1. Enter the user menu and press X3
2. Press
3. Enter a 2 digit code
4. Press to save
9
CODES
NE XT
EN TR
NE XT
Delete TAG ?
ENTER/NEXT/END
EN TR
Tag Removed!
Press END
END
9
CODES
NE XT
Duress Code
ENTER/NEXT/END
EN TR
Duress Code
****** (4-6)
EN TR
9
CODES
NE XT
Short Code
ENTER/NEXT/END
EN TR
Short Code
**
EN TR

Pima Captain 8 Specifications

General

Brand	Pima
Model	Captain 8
Category	Security System
Language	English