Pima Captain 8 - Page 37

Hunter-Pro 832/8144 & Captain 8 User Guide
37
Fault
Description and troubleshoot
Check Keypad Number
The keypad’s ID is not configured properly.
Keypad X Fault
Keypad X is faulty.
Zone Fault
A zone (include. Wireless zone) is tampered or faulty. Possible
tampering!
Detec Vol. Fault
Detector voltage is faulty due to possible tampering. Call a service
technician immediately!
SMS Com. Failure
SMS communication fault.
Install SMS Unit
No SMS unit is detected or the unit is faulty.
Network Fault
Network communication with the Central Monitoring Station is faulty.
IO-R X Fault
The I/O-R relay expander is faulty.
IO-R X Tamper
The I/O-R relay expander tamper is open.
IO-R X Voltage
Low voltage in the I/O-R relay expander.
IO-R X Mains
IO-R X has no Mains voltage.
IO-R X Batt
IO-R X has low battery.
Wireless Jamming
The wireless receiver (I/O-WN) is jammed.
Supervision
A wireless detector “life signal” has not been received.
Int. siren fault
The internal siren is faulty.
Ext. siren fault
The external siren is faulty.
Video X fault
Communication fault between the panel and the video unit VVR #X.
Video X power fault
Voltage fault in VVR #X.
net4pro fault
Communication fault between the panel and the net4pro network card.