Setting the camera for
Camera View mode
To display Camera View at all times, “Camera
View” needs to be set to “On”.
p To set the rear view camera for Camera
View mode, “Back Camera Input” needs
to be set to “On”.
= For details, refer to Setting rear view
camera activation on page 158.
p To set the second camera for Camera
View mode, set “AV Input” to “Camera” or
set “2nd Camera Input” to “On”.
= For details, refer to Setting AV input on
page 157.
= For details, refer to Setting the second
camera input on page 162.
p You can also turn this function on by
touching [Camera View] on the AV
source selection screen or in the source
list.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “System” screen appears.
3 Touch [Camera settings].
The following screen appears.
4 Touch [Camera View] repeatedly until
the desired setting appears.
! Off (default):
Turns the camera view setting off.
! On:
Turns the camera view setting on.
If no operations are performed for seven sec-
onds after the AV operation screen is dis-
played, the camera view will appear
automatically.
p If you touch the screen while the camera
view is displayed, the displayed image will
turn off temporarily.
When the camera view of both rear view cam-
era and second camera are available, the key
to switch the display appears.
1
1 Switches the display between rear view
image and second camera image.
Displaying the parking
assist guidelines
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “System” screen appears.
3 Touch [Camera settings].
The following screen appears.
Engb
160
Chapter
29
System settings
To Next Page
Loading...
