On first-time startup of the
navigation system
When you use the navigation function for the
first time, an initial setup process starts auto-
matically. Follow the steps below.
p You can change the language and GPS log
setting later using [Regional] and [Usage
Reports] in the “Settings” screen. Other
settings can be restarted later using [Start
Configuration Wizard] in the “Settings”
screen.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys.
Initiates the ini tial startup of the
navigation system.
p The first time that the MAP button is
pressed, the navigation system also begins
its initial startup.
After a short pause, the splash screen comes
on for a few seconds.
The “Language” screen appears.
3 Select the language that you want to
use on the screen, then touch [Select].
The “EULA” screen appears.
4 Read the terms carefully, checking the
details, and then touch [Accept] if you
agree to the conditions.
The “Usage Reports” screen appears.
5 Touch [Yes].
If you touch [Yes], the software collects usage
information and GPS logs that may be used
for improving the application and the quality
and coverage of maps.
p If you do not wish to activate information
collection, touch [No].
The configuration wizard starts.
6 Touch [Next].
The “Voice Language” screen appears.
7 Select the language that you want to
use for voice guidance messages, then
touch [Next].
8 If needed, modify the unit settings,
then touch [Next].
The “Route Preferences” screen appears.
9 If needed, modify the default route
planning options, then touch [Next].
10 Touch [Activate], then [Next].
A message saying that the connected online
features are activated appears if you activate
these services right away.
= For details, refer to “Online Services” set-
tings on page 66.
p You will need to install the AVICSYNC App
on your iPhone or smartphone first in order
to be able to use online services, which re-
quire a paid subscription. Service coverage
for each online service may vary depending
on the content provider providing the ser-
vice.
= For details, refer to Expanding the use of
the navigation functions on page 67.
11 Select the connected services you want
to use, then touch [Next].
The initial setup is now complete. The Map
screen appears and you can start using the
navigation system.
Engb
24
Chapter
02
Basic operation
To Next Page
Loading...
