11. dsp_phaser
11-1. Overview
When this effect is activated, the phaser effect is added to the output sound.
Two parameters are adjustable on DDJ-WeGO2.
11-2. Parameter settings
Shape
Switch the [Shape] of the effect.
The parameter can be adjusted on the GUI of Virtual DJ.
Reset Phase
Click this button to reset the phase.
The parameter can be adjusted on the GUI of Virtual DJ.
Move
Click this button to activate/deactivate the [Move].
The parameter can be adjusted on the GUI of Virtual DJ.
Presets
Click this button to save or load the adjusted value.
The parameter can be adjusted on the GUI of Virtual DJ.
Length
Set the cycle of moving the phaser effect.
Press the [JOG FX] button and rotate the [JOG] to set the cycle length.
Strength
Adjust the [Strength] level of the Phaser effect.
Press the [JOG FX] button while pressing [SHIFT] and rotate the [JOG] to adjust the [Strength].
Stages
Adjust the [Stages] level.
The parameter can be adjusted on the GUI of Virtual DJ.
To Next Page
Loading...
Need help?
General
