5. Reverb_TexZK
5-1. Overview
When this effect is activated, reverb effect is added.
Two parameters are adjustable on DDJ-WeGO2.
5-2. Parameter settings
Reset
Click this button to reset the parameter to the default value.
The parameter can be adjusted on the GUI of Virtual DJ.
Dry / Wet
Adjust the balance of the original sound and the effect sound.
Press the [JOG FX] button and rotate the [JOG] to adjust the balance.
Room size
Adjust the reverb effect level.
Press the [JOG FX] button while pressing the [SHIFT] button and rotate the [JOG] to adjust the effect.
Turn the [JOG] clockwise to increase the effect level.
Reverberation high-pass filter
Adjust the level of High-pass filter.
The parameter can be adjusted on the GUI of Virtual DJ.
Reverberation low-pass filter
Adjust the level of Low-pass filter.
The parameter can be adjusted on the GUI of Virtual DJ.
* When the track is paused while the Reverb_TexZK is on, the attenuated sound is output depending on the
[Room size] value even while the track is paused.
To Next Page
Loading...
Need help?
General
