Pioneer DJM-800 Service Manual (English)

Other manuals for Pioneer DJM-800

Service Manual176 pages

Instruction Manual24 pages

Questions and Answers:

M
martinrachelAug 22, 2025
What to do if Pioneer Music Mixer has no sound or low volume?
- C
  Cameron GoodAug 22, 2025
  If you're experiencing no sound or low volume with your Pioneer Music Mixer, consider these potential causes and solutions: * Ensure the input selector is correctly set to your playback component. * Verify that the DIGITAL/CD or DIGITAL/LINE input selector switch on the rear panel matches the component you're using. * Check all connection cables for proper and secure connections. Clean any dirty jacks or plugs before connecting. * Adjust the rear panel master output attenuator switch (MASTER ATT) if it's set to –12 dB or another reduced level.
S
Shannon NixonSep 1, 2025
How to fix Pioneer DJM-800 cross fader when it doesn't work?
- K
  Kimberly ReynoldsSep 1, 2025
  If the cross fader on your Pioneer Music Mixer isn't working, the CROSS FADER ASSIGN switch setting ([A], [THRU], [B]) might be incorrect. Make sure to set the CROSS FADER ASSIGN switch correctly for the channel you want to use.
N
Nicole DillonAug 31, 2025
What to do if there is no digital output from Pioneer Music Mixer?
- C
  Cheryl JohnsonAug 31, 2025
  If you're not getting any digital output from your Pioneer Music Mixer, ensure that the digital output sampling frequency (fs) matches the specifications of the connected component. Adjust the rear panel sampling frequency selector accordingly.
P
patriciajordanAug 30, 2025
What to do if sound from external effector is distorted on Pioneer DJM-800?
- E
  elizabeth05Aug 30, 2025
  If the sound from an external effector is distorted when used with your Pioneer Music Mixer, the input level from the external effector might be set too high. Try lowering the output level of the external effector.
M
Michelle HartAug 28, 2025
How to troubleshoot effects not working on Pioneer Music Mixer?
- A
  Ashley CooperAug 28, 2025
  If the effects aren't working on your Pioneer Music Mixer, check that the effect channel selector is correctly set for the desired channel. Also, make sure that the effect parameter 2 adjust dial (LEVEL/ DEPTH) is not set to [MIN]; adjust it as needed.
L
Lindsey FreemanAug 27, 2025
Why is external effector not working with Pioneer DJM-800?
- N
  Nicholas BrownAug 27, 2025
  If your external effector isn't working with the Pioneer Music Mixer, check these potential issues: * Ensure the effect selector is set to [SND/RTN]. * Verify that the effector is correctly connected to the rear panel SEND/RETURN connectors. * Use the effect channel selector to select the audio source to which you wish to apply the effects.
X
xpalmerAug 27, 2025
How to enable fader start on Pioneer DJM-800 with CD player?
- S
  Steven GreenAug 27, 2025
  If you're unable to perform a fader start with your CD player on the Pioneer Music Mixer, check the following: 1. Ensure the FADER START button is set to ON. 2. Verify that the rear panel CONTROL jack is connected to the CD player using a control cable. 3. Make sure that both the CONTROL jacks and analog input connectors are connected.
D
Darrell WilliamsAug 25, 2025
Why Pioneer Music Mixer BPM can't be measured correctly?
- K
  Karen BrownAug 26, 2025
  If your Pioneer Music Mixer is having trouble measuring BPM or the measured value is incorrect, it could be due to the following reasons: * The input level might be too high or too low. Adjust the TRIM dial so that the input level approaches 0 dB on the channel level indicator. * BPM may not be correctly measurable with some tracks. Adjust other channels as well so that the input levels approach 0 dB in the channel level indicator. * You can also manually set the BPM by striking the TAP button.
M
Mallory AllenAug 23, 2025
How to fix distorted sound on Pioneer DJM-800 Music Mixer?
- J
  Jessica BarberAug 23, 2025
  If the sound from your Pioneer Music Mixer is distorted, it could be due to a few reasons. First, try adjusting the master output level (MASTER LEVEL) dial or the rear panel master output attenuator (MASTER ATT) switch. If that doesn't solve the issue, the input level might be too high; in this case, adjust the TRIM dial until the input level approaches 0 dB on the channel level indicator.

Pioneer DJM-800 Specifications

General

Equalizer	Yes
Product color	Black
Audio output channels	4.0 channels
Signal-to-Noise Ratio (SNR)	105 dB
Total Harmonic Distortion (THD)	0.005 %
Connectivity technology	Wired
Digital audio coaxial out	1
Dimensions (WxDxH)	320 x 108 x 381 mm
Power consumption (typical)	30 W