To Next PageTo Next PageWhy aren’t recorded USB storage device cue and loop points displayed on my Pioneer MEP-7000 DJ Equipment?
Recorded cue and loop points may not display if the USB storage device was disconnected or the power was turned off before performing the proper dismount procedure. Always perform the dismount procedure before disconnecting the USB storage device or turning off the power.
Why can’t I store cue/loop point data for tracks on a USB storage device with my Pioneer MEP-7000?
If you can't store cue/loop point data, there might not be enough space on the USB storage device. Delete unnecessary files to free up space.
Why are auto cue and other settings not stored on my Pioneer MEP-7000 DJ Equipment?
If settings aren't being stored, it's possible the power was turned off immediately after making a change. Wait 10 seconds before turning off the power after a change.
Why is there no sound output from my Pioneer DJ Equipment?
If you're not getting any sound, there could be a few reasons. First, ensure the audio cable is securely plugged in. Then, check the switch and volume settings on your DJ mixer to make sure it's working correctly. Also, check if the jacks or jack plugs are dirty and clean them if necessary. Finally, verify that the controller is not in pause mode; if it is, press the play/pause button.
Why does back cueing fail to work when pressing the CUE button during playback on my Pioneer MEP-7000?
Back cueing won't work if no cueing point has been defined. Specify the desired cueing point. (P. 38)
Why does the jog dial perform a different function than desired on my Pioneer MEP-7000?
If the jog dial isn't working as expected, the jog mode might be incorrect. Press the SCRATCH/JOG BREAK button to select the desired function.
Why does track searching fail to halt with Auto Cue function turned on in my Pioneer MEP-7000 DJ Equipment?
Track searching may take longer if there are long silent portions between tracks. If a search cannot be performed within 10 seconds, the track's start is set as the cue point. Hold the TIME/A.CUE button for one second or more to set the Auto Cue mode to OFF.
Why won’t my Pioneer DJ equipment track load during playback?
If a track won't load during playback, the LOAD LOCK may be set to ON. Use the UTILITY screen to set LOAD LOCK to OFF.
Why is a large amount of noise generated when playing back a certain disc on my Pioneer MEP-7000 DJ Equipment?
Excessive noise during disc playback can occur if the disc is severely warped or scratched. Try replacing it with a new disc. Also, the disc may be unusually dusty or dirty, so wipe away any dust or dirt.
Why does a caution message about excess current appear on my Pioneer MEP-7000 DJ Equipment?
This message appears when the unit detects an electrical current stronger than allowed on the USB1 or USB2 port. To restore normal operation, follow the directions in 'Connecting a USB storage device' (P. 26). The unit's allowable current is 500 mA or less per port. Use USB storage devices that meet these standards. If using a bus-powered USB hub, connect the USB storage device directly to the unit.
General| Frequency range | 4 - 20000 Hz |
|---|---|
| Channels quantity | - channels |
| Digital sound processing | - bit |
| Total Harmonic Distortion (THD) | 0.006 % |
| Dimensions (WxDxH) | 483 x 325 x 91 mm |
| Power consumption (typical) | 33 W |
Weight and Dimensions| Weight | 6100 g |
|---|
Instructions for safe operation, installation, and maintenance to prevent hazards.
Warnings related to electrical shock hazards and proper plug usage.
Warnings about operating conditions, ventilation, and power cord handling.
Specifies the recommended temperature and humidity for optimal operation.
Advises on voltage requirements and proper plug connection for safety.
Covers diverse media support, MP3/AAC/WAV/AIFF playback, and playlist functions.
Details how to connect and use the unit with DJ software like DJS, including normal and manipulator styles.
Explains jog dial functions, tempo control, scratch/jog break effects, and auto mix.
Describes CD-G karaoke, tempo control, cue/loop functions, and vibration resistance.
Lists supported disc types and logos, and notes on playback.
Details specifications and limitations for playing MP3, AAC, WAV, and AIFF files on discs and USB.
Lists specific disc types and file formats that the unit cannot play.
Provides recommendations for unit placement to ensure proper heat dissipation and ventilation.
Instructions for cleaning the player, jog dial, and handling potential condensation.
Guidance on installing the unit into a standard EIA rack.
Details how to connect the control unit to the drive unit and DJ mixer.
Explains connections for external monitors and stereo amplifiers or digital input devices.
Instructions for connecting the computer via USB and the power cord.
Details how to connect the control unit to a computer for manipulator style DJ software operation.
Identifies and explains the controls and ports on the front panel of the drive unit.
Identifies and explains the controls and ports on the front panel of the control unit.
Describes the various buttons, dial, and indicators on the control unit's front panel.
Explains the layout and information displayed on the main center display.
Details the layout and information shown on the A/B displays.
Identifies and explains the rear panel connectors of the drive unit.
Identifies and explains the rear panel connectors of the control unit.
Provides instructions on how to insert and eject discs from the unit.
Explains how to use the forcible eject pin if a disc cannot be removed normally.
Details writing management data and connecting/disconnecting USB storage devices.
Explains how to navigate and use the BROWSE screen for track selection.
Guides on selecting music sources like discs, USB, and PC via the BROWSE screen.
Describes browsing files in their native structure or using constructed libraries for easier selection.
Step-by-step guide on selecting tracks using the BROWSE screen and LOAD buttons.
Explains how to view detailed information about the currently playing track.
Details how to play M3U files, their limitations, and library browsing exclusion.
Guides on searching for tracks using keywords via the rotary dial or keyboard.
Explains using a USB keyboard for track/folder navigation, keyword search, and playlist editing.
Details how to create, manage, and play tracks using playlists for quick selection.
Covers changing track order, deleting tracks, closing, and editing playlists.
Instructions for deleting an entire playlist and saving playlist edits.
Explains auto play, stopping, pausing, and resuming disc playback operations.
Details how to use fast forward and fast reverse functions with search buttons.
Explains how to skip tracks using search buttons and jog dial.
Details various functions of the jog dial, including pitch bend, scratch, and frame search.
Covers adjusting play speed using the tempo slider and pitch bend buttons.
Provides detailed instructions on setting and managing cue points for tracks.
Explains how to turn the auto cue function on/off and adjust its level.
Details how to create, cancel, and manage loop play sections.
Explains how to store and recall cue and loop points for future use.
Describes how to perform scratch and jog break effects using the jog dial.
Details the available scratch effect modes (Scratch, Trans, Bubble).
Explains the different jog break effect modes (Jet, Roll, Wah) and their operation.
Describes using the MIX screen for track mixing, BPM sync, and automatic playback.
Explains different mix modes (Cut-In, Zip, Echo, Cross Fade) and instant change function.
Guides on setting up automatic playback of playlists using mix modes.
Details how to use fader start play in conjunction with a DJ mixer.
Presents the software license agreement and warranty disclaimers for DJS software.
Outlines restrictions, general terms, and termination conditions for the DJS software agreement.
Specifies the minimum hardware and software requirements for running DJS.
Information on the trial period, user registration, and online support for DJS.
Lists important precautions to observe before installing the DJS software.
Step-by-step guide on how to install the DJS software from the CD-ROM.
Presents the license agreement for the driver software.
Provides instructions for installing the necessary driver for computer connectivity.
Guides on connecting the MEP-7000 to the computer and the expected driver installation messages.
Explains how to adjust the buffer size for optimal audio performance and latency.
Lists DJ software programs supported by the MEP-7000.
Explains Normal Style and Manipulator Style for operating DJ software.
Outlines the steps required to prepare the computer and DJ software before use.
Explains how to control DJ software using the unit's dedicated communications protocol.
Details how to use MIDI for controlling DJ software from the MEP-7000.
Guides on configuring MIDI channels for controller communication within the UTILITY screen.
A reference table listing MIDI messages for controller functions.
Instructions on setting the unit to CD-G playback mode via the UTILITY screen.
Guides on how to play a CD-G disc and how to exit CD-G play mode.
Overview of settings available in the UTILITY screen, including display, CD-G, and PC configurations.
Explains how to set browse types for USB devices and select the display language.
Covers general settings like LOAD LOCK, AUTO CUE LEVEL, keyboard language, and backup mode.
Guides on creating, updating, and deleting music libraries on USB storage devices.
Instructions for backing up and restoring playlists, cue, and loop point data.
Details the procedure to restore all unit settings to their factory defaults.
Lists common problems like disc ejection failure and playback issues with possible causes and solutions.
Explains the behavior of LCD and OEL screens, including potential pixel issues and cold-weather effects.
Lists error codes, their descriptions, and recommended actions for troubleshooting.
Information on how to update the unit's software for improved operation and functionality.
Outlines limitations related to file formats, folder structures, image display, mixing, and playlist capacity.
