Pioneer PDP-434HDE

11Using the Electronic Programme Guide (EPG)
English
63
En
6
Press / to select “PDC/VPS”.
7
Press / to select “ON” or “OFF”.
8
Press / to select “Record?”.
9
Press / to select “OK”, and then press ENTER.
10
Press EPG to exit the menu.
• Make sure to leave the VCR power on when preset-
ting TV programmes for recording.
•You can return to the programme list screen by
pressing RETURN.
• This function is available only when recording equip-
ment has been connected to the INPUT 2 or 3 termi-
nal with the i/o Link.A activated, using a SCART
cable.
•For programmes preset (for recording) using the
EPG, you can perform deletion or change only on the
recording equipment (VCR or DVD recorder) which is
a transfer destination.
Selecting a programme for immediate
watch
Using the EPG, you can also select a TV programme
currently on air to immediately start watching.
1
Press EPG.
2
Press / to select the desired programme
currently on air, and then press ENTER.
Tu.15.07 12:46
ExitEPG
Watch
13:00-13:30 *****
*******************
Program Information
EPG
RETURN
•Information about the selected programme
appears.
3
Press the green button.
• The EPG menu is quitted and the selected TV
programme is displayed using the entire screen.