Pioneer PDP-434HDE

12 Useful Adjustment Settings
66
En
Colour system setting (AV mode only)
If an image does not appear clearly, select another
colour system (e.g., PAL, NTSC).
1
Press HOME MENU.
2
Press / to select “Option”, and then press
ENTER.
3
Press / to select “Colour System”, and then
press ENTER.
4
Press / to select a video signal system, and
then press ENTER.
Colour System
Auto
PAL
SECAM
NTSC
4.43NTSC
•You can select “Auto”, “PAL”, “SECAM”, “NTSC”,
or “4.43NTSC”.
•With “Auto” selected, input signals are
automatically identified.
5
Press HOME MENU to exit the menu.
• The factory default is “Auto”.
•You need to perform colour system setting for each of
INPUT 1 to 4.
•For colour system setting for each channel, see
pages 30 and 31.