EasyManuals Logo

Pioneer SC-LX73 Operating Instructions

Pioneer SC-LX73
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Connecting your equipment
03
41
En
Plugging in the receiver
Only plug in after you have connected all your
components to this receiver, including the speakers.
1 Plug the supplied power cord into the
AC IN
socket
on the back of the receiver.
2 Plug the other end into a power outlet.
1
CAUTION
•Make sure you switch the VOLTAGE SELECTOR on
the rear panel to the right voltage for your country or
region (see Voltage Selector on page 3).
Handle the power cord by the plug part. Do not pull
out the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place
the unit, a piece of furniture, or other object on the
power cord or pinch the cord in any other way. Never
make a knot in the cord or tie it with other cables. The
power cords should be routed so that they are not
likely to be stepped on. A damaged power cord can
cause a fire or give you
an electric shock. Check the
power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent
service company for a replacement.
Do not use any power cord other than the one
supplied with this unit.
Do not use the supplied power cord for any purpose
other than that described below.
•The receiver should be disconnected by removing the
mains plug from the wall socket when not in regular
use, e.g., when on vacation.
•Make sure the blue STANDBY/ON light has gone
out before unplugging.
If you have connected speakers with a 6
Ω
impedance, change the impedance setting before
turning on the power.
Note
1After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins. You cannot carry out any
operations during this process. The HDMI indicator in the front panel display blinks during this process, and you can turn on this receiver
once it has stopped blinking. When you set the Control with HDMI to OFF, you can skip this process. For details about the Control with HDMI
feature, see Control with HDMI function on page 67.
SC-LX83_73_DLPW.book 41 ペー 105月9日 水曜 午2時

Table of Contents

Other manuals for Pioneer SC-LX73

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer SC-LX73 and is the answer not in the manual?

Pioneer SC-LX73 Specifications

General IconGeneral
BrandPioneer
ModelSC-LX73
CategoryReceiver
LanguageEnglish

Related product manuals