Pioneer UDP-LX500 User Manual

45
En
07
❖ Erasing data that has been added
to BDs and application data
Use this procedure to erase data that has been
added to BDs (data downloaded with the BD-LIVE
function and data used with the BONUSVIEW
function) and application data.
Caution
• Some time is required to erase the data.
• Do not unplug the power cord while data is
being erased.
1 Select and set Options  BUDA  BUDA Setup.
Use / to select, then press ENTER.
2 Select and set Format.
Press ENTER.
❖ Registering or Changing the
password
Use this procedure to register or change the code
number required for the Parental Lock settings.
About default password of this unit
The default password is “0000”.
• This unit might ask you to enter a password
when you change the password.
• If you reset this unit, your password is
simultaneously changed to the default setting.
1 Select and set Security  Change Password 
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Re-input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
• To change the password, input the previously
registered password, then input the new
password.
Note
• We recommend making a note of the
password.
• If you have forgotten the password, reset the
player to the factory default setting, then
register the password again (page 46).
❖ Changing the Parental Lock level
for viewing DVDs/BD-ROMs
Some discs containing scenes of violence, for
example, have Parental Lock levels (check the
indications on the disc’s jacket or elsewhere). To
restrict viewing these discs, set the player’s level to
the level lower than the discs.
1 Select and set Security  Parental Control 
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Change the level.
Use / to change, then press ENTER to set.
Note
• The level can be set to Off or between Level 1
and Level 8. When set to Off, viewing is not
restricted.
❖ Changing the Country/Area code
1 Select and set Security  Country Code  Next
Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Change the country/area code.
Use / to change, then press ENTER to set.

Pioneer UDP-LX500 Specifications

General

3D	-
Device type	Blu-Ray player
Cassette deck	No
Product color	Black
USB 2.0 connectors	2
Firmware upgradeable	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.45 W
Power consumption (typical)	28 W
Playback disc types	BD-R, BD-R DL, BD-RE, BD-RE DL, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Disc types supported	BD, BD-R, BD-R DL, BD-RE, BD-RE DL, CD, CD-DA, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Playback disc formats	CD audio, DVD-Audio, DVD-Video

Weight and Dimensions

Depth	337 mm
Width	435 mm
Height	118 mm
Weight	10300 g