L20-103 Rev 00 (29 July 1995)
WARNING
Do NOT attempt to make adjustments to sealed devices. hey are set at the factoryand DO
NOT require further adjustments.
NOTICE
Installation should only be done by a Competent Service Technician.
The Model & Serial Number, and the Gas Type & Pressure are stamped into the Data Plate,
located on the inside panel of the door.
NOTICE
This appliance is intended for professional commercial use only and, as such, should be
operated by fully trained personnel.
NOTICE
It is recommended that this machine be inspected by a Qualified Technician on yearly basis.
WARNING
Installation and all connections must be made according to National and Local Regulations
and Codes in force.
WARNING
To prevent burns, always ensure the fryer is completely SHUT DOWN and COOLED down
before working on the fryer. Do not break any fryer gas connections while the unit is
connected to a gas supply line.
WARNING
The power supply must be disconnected before servicing or cleaning the appliance.
WARRANTY
Pitco Frialators will be warranted against defects in manufacturing or materials as follows:
1. Fry Tanks:
Stainless Steel - 10 Years
Plain Steel - 5 Years
2. All Other Parts - 1 Year
Parts will be repaired or replaced at our option and will include the parts only unless otherwise specified.
To Next Page
Loading...
Need help?
General
