Piusi Cube 70/33 - Transport, Handling and Unpacking; Disposal

10 /6 0
Installation, use and maintenance
M0097D rev.00 ENIT
.
. TRANSPORT, HANDLING AND UNPACKING
When the machine is not used, whether it is packed or unpacked, it must be stored in a place
protected from the weather (rain, damp, sun, etc.) and from dust. To remove the cardboard
packaging, use a pair of scissors or cuers, being careful not to damage the appliance. Fully open
the packaging and take out the CUBE so that it can be taken to the place of final installation.
Due to the weight of CUBE, the product should be removed from its packaging by 2 persons.
Moreover, 2 persons should also aend to the positioning, fixing and installation phase. Once the
packaging has been removed, the station must always be kept in vertical position. Packaging parts
(cardboard, wood, cellophane, etc.) must be placed in specific containers and not le lying around
or within reach of children, as these represent a potential risk hazard. They must be disposed of
according to the regulations applicable in the country of use. Check the integrity of the machine
by making sure the shipped parts are not damaged in any way that could affect safety and
operation. In case of any doubts, do not start the appliance but contact the manufacturer’s aer-
sales service.
CUBE is shipped inside stackable cardboard packaging.
Dimensions of packaging:
H =  mm / L =  mm / D =  mm
Weight of packaging: , kg
Total weight:
CUBE / =  kg
CUBE / =  kg
CUBE DC V =  kg
CUBE DC V =  kg
CUBE / =  kg
. DISPOSAL
Foreword
The components must be given to companies specializing in disposal and
recycling of industrial waste.
Disposal of
packaging
The packaging consists of biodegradable cardboard which can be
delivered to companies specializing in normal recycling of cellulose.