Environmental conditions
INSTALLATION
.
.
Working temperature: -C min., +C max.;
Relative humidity: % max.
The specified limit temperatures apply to the pump components and must be complied with to avoid
possible damage or faults. Extreme operating conditions can cause a motor temperature rise with
consequent shutdown due to tripping of the overload circuit-breaker. Switch off the pump and wait for it
to cool before resuming operation. The overload circuit-breaker resets automatically when the motor has
cooled sufficiently.
ATTENTION
¦ CUBE
¦ Valve/filter kit (may not be present, depending on the version).
¦ Nozzle
¦ Hose
Screw off the screws.
Put the knob on the guide and push thoroughly.
Package content
Opening
Reset knob
31 2 4
To Next Page
Loading...
