Piusi Cube 70/33 - Safety Information; Mains Preliminary Checks; Fire and Explosion Prevention

6 /6 0
Installation, use and maintenance
M0097D rev.00 ENIT
This manual should be complete and legible throughout. It should
remain available to end users and specialist installation and
maintenance technicians for consultation at any time.
All reproduction rights are reserved by PIUSI S.p.A.
The text cannot be reprinted without the wrien permission
of PIUSI S.p.A.
© PIUSI S.p.A.
THIS MANUAL IS THE PROPERTY OF PIUSI S.p.A..
ANY REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
Manual
preservation
Mains -
preliminary
checks before
installation and
maintenance
control
Fire and
explosion
Reproduction
rights
SAFETY INFORMATION.
When flammable fluids are present in the working area, such as
gasoline and windshield wiper fluid, be aware that flammable
fumes can ignite or explode. To help prevent fire and explosions:
¦ use equipment only in well ventilated area;
¦ keep working area free of debris, including rags and spilled or
open containers of solvent and gasoline;
¦ do not plug or unplug power cords or turn lights on or off when
flammable fumes are present;
¦ ground all equipment in the working area;
¦ stop operation immediately if static sparking occurs or if you
feel a shock, do not use equipment until you identify and
correct the problem;
¦ keep a working fire extinguisher in the working area.
You must avoid any contact between the electrical power
supply and the fluid.
Before any checks or maintenance work are carried out, disconnect
the power source.
WARNING
WARNING