Cleaning
pump filter
The pump filter must be cleaned weekly or more often whenever a
reduction in flow rate is noticed.
The frequency required depends most of all on the quantity of fuel
dispensed, but also on other causes as well, such as dispensing fuel
immediately after refilling the tank, which stirs up sediment which
normally lies at the bottom.
To gain access to the filter:
¦ Remove the upper part of the CUBE (and the side part for the
version CUBE ), by unscrewing the side screws (see "Opening
and Closing CUBE");
¦ Screw off the screws on the filter cover.
To clean it, it is sufficient to wash it and blow through it.
To Next Page
Loading...
