Pixsys ATR 421 User Manual

ATR 421 - User manual 19
Press Display Do
2
Decrease or Increase until
choosen cycle is visualized
cY.01 (for cycle no.1), cY.02 (for
cycle no.2),
3
O
K
or
STA
R
T
STO
P
Cycle starts. Buzzer sounds
for a second. Green display
shows the process while red
display shows the setpoint
introduced on parameter 29
ui . d .2.
If function “Delayed start” is enabled (see parameter 30 dE.St.) follow the
points below:
Press Display Do
4
O
K
or
STA
R
T
STO
P
Red display shows wait
while green display shows the
programmed waiting time
 ashing.
5
Increase or decrease
time for delayed start
(hours:minutes).
6
O
K
Start of waiting time. At
elapsing of programmed time,
cycle will start.
Press
or to modify the
time.
7.2 Fast advancement during the cycle
During functioning or after a restart it can be useful to onwards or backwards
the cycle in progress, to reach chosen setpoint value.
Press Display Do
1
or
Forwards or backwards (each
beep of internal buzzer me-
ans one minute).
To stop the cycle and set
the controller in , before cycle
end press
ST
A
R
T
STO
P
for a second.

Pixsys ATR 421 Specifications

General

Brand	Pixsys
Model	ATR 421
Category	Controller
Language	English