User manual - ATR224 - DRR224 - 29
GROUP R -
disp.
- Display and interface
277
v .FLt
Visualization Filter
dis a b.
Disabled
ptcHf
Pitchfork filter (Default)
fi. o r d .
First Order
fi. o r. p.
First Order with Pitchfork
2 sa.m.
2 Samples Mean
....
...n Samples Mean
10.sa.m.
10 Samples Mean
278
vi . d.2
Visualization Display 2
Selects visualization on display .
c.1.S P v
Command 1 setpoint (Default)
o u. P e.1
Percentage of command output 1
279
tMo . d.
Timeout Display
Determines the display timeout
diS a b.
Disabled. Display always ON
(Default)
1S S
15 seconds
1 Min
1 minute
5 Min
5 minutes
10 Min
10 minutes
3 0Min
30 minutes
1 h
1 hour
280
tMo .S.
Timeout Selection
Selects which display is switched off when Display Timout expires
d i s p.1
Display 1
d i s p. 2
Display 2 (Default)
d s p.1. 2
Display 1 and 2
d.1.2.Ld.
Display 1, 2 and led
282
v.out
Voltage Output
Selects the voltage on the sensors power terminals and of the digital outputs (SSR).
12 v
12 volt (Default)
24 v
24 volt
283
ScL. t.
Scrolling Time
Select the duration for the visualization of the user menu data, before returning to the default
page.
3 s
3 seconds
s s
5 seconds (Default)
10 s
10 seconds
30 s
30 seconds
1 MiN
1 minutes
5 MiN
5 minutes
10 MiN
10 minutes
M A n.S c.
Manual scroll
284
d .SP.F.
Display Special Functions
diS A b.
Special functions disabled
SWAP
Shows the setpoint on display 1 and the process on display 2 (only if Par. 278 vi . d .2 set
on
c .1 . S P v )
285
nFc.L.
NFC Lock
diS A b.
NFC lock disabled: NFC accessible.
En Ab.
NFC lock enabled: NFC not accessible.