Need help?Do you have a question about the Planar IT-19C and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Screen Size | 19 inches |
| Native Resolution | 1280 x 1024 |
| Aspect Ratio | 5:4 |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle | 170°/160° |
| Video Inputs | VGA, DVI-D |
| Operating Temperature | 0°C to 40°C |
| Brightness | 250 cd/m² |
Details technical parameters like frequency range, resolution, input impedance, and measurement ranges.
Overview of channel, scan, and spectrum measurement modes.
Details measuring TV channel parameters and voltage levels for analog/digital signals.
Explains signal level display as a bar-graph for ripple and tilt measurements.
Describes displaying the signal spectrum and marker functions.
Manages channel plans, limit plans, and data logging for measurement results.
Checks the correct functioning of internal components and operating conditions.
Controls the analyzer via PC using Viewlt19C and SoftManager software.
Procedures for updating device firmware via internet or manually.
To Next Page