27
• constellation diagram.
3) carry out the spectrum measurement within the full frequency band;
4) measure the channel level in accordance with the channel plan;
5) view and save all measured data;
6) view and save data logger pages;
7) view, edit and save Channel plans;
8) update the firmware.
The screen view of ViewIT19C is shown in Figure 4.21.
Figure 4.21
4.8.3 SoftManager PC Software
SoftManager is intended for updating the device firmware (Section 4.9). The software can be
installed separately, it can also be installed as a part of the ViewIt19C software and be called from
it. The appearance of the program is shown in Figure 4.22.
To Next Page
Loading...