Introduction
Planar PS Series 4K Displays User Manual
020-1384-00C
5. Cleaning the Display
If dust collects on the power plug, remove the plug from the outlet and clean off the dust. Dust
build-up may cause a fire.
Remove the power plug before cleaning. Failure to do so may result in electrical shock or
damage.
Keep the following points in mind when cleaning the surface of the display:
• When the surface of the display becomes dirty, wipe the surface lightly with a soft clean
cloth.
• If the surface requires additional cleaning, use LCD screen cleaner or LCD wipes, which
are available at most electronics stores.
• Do not let cleaner seep into the display, as it may cause electrical shock or damage.
To Next Page
Loading...
Need help?
General
