Planar PS5074K - Page 41

Operating the Display
Planar PS Series 4K Displays User Manual
020-1384-00C
Page | 41
EDID Setup
 Select EDID (Extended Display Identification Data) of the HDMI and DisplayPort inputs
 Options:
。 HDMI 1, HDMI2: HDMI 1.4, HDMI 2.0;
。 DP: 4K30, 4K60
 Default:
。 HDMI 1, HDMI2: HDMI 2.0;
。 DP: 4K60
 Note: HDMI 2.0 is the more modern standard and supports 3840x2160 @ 60Hz
resolution. However, sometimes HDMI 1.4 is needed for compatibility with older
devices.
Touch Control
 Select whether the touch screen controls an external PC via the Touch USB connector,
or controls the display’s menu system.
 Options: Auto, Internal, External
 Default: Auto
CEC Setup
 Control of a device and display panels over the HDMI port by using one remote control.
。 CEC Enable
 Enable HDMI-CEC control
 Options: On, Off
 Default: Off
。 Auto Standby
 Enable auto standby and make sure that CEC Enable is set to On first.
 Options: On, Off
 Default: Off
App Manager
 Shows all downloaded Android apps in the display, including information of app version
and installed size.
 At the bottom appears the amount of total and free storage space.
Factory Reset
 Restore all settings to their default
 Options: No, Yes
 Default: No
Firmware Update (USB)
 Plug in the USB flash drive and select Yes to proceed with firmware update.
 Options: No, Yes
 Default: Yes