Planet IGS-5225-4T2S - Page 12

12
Figure 4-3: Conguring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.
 Storethecurrentswitchconguration
5. At the “#” prompt, enter the following command and press <Enter>.
#copyrunning-congstartup-cong
Figure 4-4: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed Switch will
apply the new IP address setting immediately. You can access the Web
interface of the Industrial Managed Switch through the new IP address.
Note
If you are not familiar with the console command or the
related parameter, enter “help” anytime in console to
get the help description.