Planet IGS-5225-4T2S - Factory Default Recovery Procedure

17
6.RecoveringBacktoDefaultConguration
To reset the IP address to the default IP address “192.168.0.100”
and the user password to factory default mode (default password
is admin), press the hardware reset button on the front panel for
about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx
and default password. Be noted that all the previous setups will be
disappeared after the factory default reset is made.
P1 P2 Fault
Ring
Reset
115200,N,8,1
1000
LNK/ACT
100
LNK/ACT
R.O.
6
5
Reset
Figure 6-1: IGS-5225-4T2S Reset Button