Planet LRP-422CST - Saving Configuration Via The Web

18
10.SavingCongurationviatheWeb
In the LRP Managed Switch, the running conguration le stores in the RAM. In
the current version, the running conguration sequence of running-cong can be
saved from the RAM to FLASH by “Save Congurations to FLASH” function, so
that the running conguration sequence becomes the startup conguration le,
whichiscalledcongurationsave.
To save all applied changes and set the current conguration as a startup
conguration, the startup-conguration le will be loaded automatically across a
system reboot.
1. Click “Save > Save Congurations to FLASH” to log in to the “Conguration
Manager”page.
2. Press the “Apply” button to save running conguration to start up congura-
tion.