Planet LRP-422CST - Recovering Back To Default Configuration

19
11.RecoveringBacktoDefaultConguration
 IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.0.100” or reset the
login password to default value, press the hardware reset button on the front
panel for about 10 seconds. After the device is rebooted, you can log in the
managementWebinterfacewithinthesamesubnetof192.168.0.xx.
LRP-422CST
Switch
RESET
1
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION
Figure 11-1: LRP-422CST Reset Button