Planet LRP-422CST User Manual

9
 ConguringIPaddress
3.Atthe“LRP-series#”prompt,enter“congure”.
4.Atthe“LRP-series (cong)#”prompt,enterthefollowingcommandandpress
<Enter>asshowninFigure6-2.
LRP-series(cong)# ip address 192.168.1.100 mask 255.255.255.0
LRP-series(cong)# ip default-gateway 192.168.1.254
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 6-2: IP Address Screen
5.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the LRPManaged Switch will apply the new IP
addresssettingimmediately.Youcan accessthe Web interfaceof theLRPManaged
SwitchthroughthenewIPaddress.
Note
If you are not familiar with console command or the related
parameter, enter “?” anytime in console to get the help
description.

Planet LRP-422CST Specifications

General

Brand	Planet
Model	LRP-422CST
Category	Switch
Language	English