3
Note: Slave device must connect to Master device through the telephone
wire. Slave cannot connect to Slave and Master cannot connect to
Master. VC-102M works as Master device and VC-102S works as
Slave device.
1.3 Key Features
The converter provides the following key features:
• Cisco LRE switch / CPE compatible
• Complies with IEEE802.3, IEEE802.3u and IEEE802.3x standards
• 5 selectable transmission modes through DIP switch on VC-102M or manage-
ment interface of VC-1602
• QAM ( Quadrature Amplitude Modulation) line code
• Designed based on Frequency Division Duplex
• Half duplex Back pressure and IEEE802.3x Full Duplex Pause frame flow con-
trol
• Built-in POTS/ISDN splitter
• Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for
POTS/ISDN connection
• Voice and data communication can be shared on the existing telephone wire
simultaneously
• Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
• Support extensive LED indicators for network diagnostics
To Next Page
Loading...
