AP Mode
A. Click these buttons to open the following screens and access the Utility's features.
Use the AP Setup screen to set up a secure wireless network.
Use the Advanced screen to configure advanced network settings.
Use the Access Control List screen to configure an access policy for your network based
on a client's MAC address.
Use the Connected Devices screen to find information on clients currently connected to
your network.
Use the About screen to find information on specifications for the Utility.
B. Use these buttons and icons to manage transmission and to find information about your
wireless connection.
Click the RF buttons to enable or disable wireless transmission.
Indicates the security status of your connection.
Indicates AP Mode is enabled.
C. Use this screen to find information on wireless network settings.
SSID This shows the name of your wireless network.
Mode Indicates the mode and hence frequency supported by your wireless connection.
Channel The channel assigned to your connection. Default is 6, options are 1-12.
IP Address The IP address identifies your Adapter on your wireless network.
Mask The subnet mask hides your IP address from outside your wireless network.
13
To Next Page
Loading...
Need help?
General
