Copyright Planika Sp. z o.o. www.planikafires.com 13
Warning! When ‘Fast start’ function is turned on the device uses the energy in the amount of 100W.
Turning off the device with button prevents from using the energy but does not turn off ‘Fast
start’ function.
7) Serial number
It displays serial number of the device.
8) Software
It displays the version of an installed program.
IV. Cleaning and maintenance
Switch off the device before cleaning. Wait until the temperature of the device gets close to the
ambient temperature. To maintain appropriate technical condition of the device, please observe the
following rules:
•
To clean stainless steel surfaces, use only gentle cleaners which do not cause
cracks or scratches, or use other means specifically designed for cleaning stainless
steel.
When purchasing and dozing cleaners, be sure to protect the environment and comply with the
recommendations of manufacturers.
It is forbidden to clean the inside of the device by unauthorized persons.
The manufacturer does not foresee a situation where it will be necessary to clean elements not
normally available.
The manufacturer is not liable for damage resulting from:
improper operation (disobeying rules included in User’s Manual)
self-dismantling
attempts to modify
using fluids other than the recommended FANOLA ®.
To Next Page
Loading...
