INDICATION OF ERRONEOUS OPERATION
10 Planmeca SingLED operating light
User’s Manual
7 INDICATION OF ERRONEOUS OPERATION
If the Planmeca SingLED operating light detects a
malfunction in the normal operation, the sensor indicator
light starts to flash.
The reason for an erroneous operation may be one of the
following:
• Error in the infrared sensor
• Broken LED
• Too low supply voltage
• Overheating of the LED
• Broken temperature sensor
In case of an erroneous operation, please contact your
local Planmeca service technician.
To Next Page
Loading...
