Need help?Do you have a question about the Planmeca Compact I and is the answer not in the manual?
General| Spittoon | Yes |
|---|---|
| Operating Light | LED |
| Imaging Technology | Digital |
| X-ray Tube Voltage | 60-70 kV |
| X-ray Tube Current | 7 mA |
| Focal Spot Size | 0.8 mm |
| Exposure Time Range | 3.2 s |
| Power Supply | 50/60 Hz |
Important safety warnings and precautions for operating and servicing the dental unit.
Key technical data including dimensions, weight, operating conditions, and power specifications.
Overview of the service mode's purpose, entry method, and general operational principles for technicians.
Step-by-step instructions on how to access the service mode using specific key sequences.
Explanation of error messages intended for technicians, indicating system errors or malfunctions.
Step-by-step guide to calibrate the position sensor for the backrest motor.
Instructions for calibrating the position sensor for the lift motor.
How to adjust internal water and air pressures using service mode and regulators.
Procedures for replacing electrical components such as software chips, fuses, and PCBs.
Detailed steps for replacing the main control PCB, including safety warnings and post-replacement configuration.
Procedures for replacing the backrest motor and chair lift motor.
Detailed steps for calibrating the foot control pedal across its six operational positions.
To Next Page