EasyManuals Logo

Planmeca Compact I User Manual

Planmeca Compact I
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Planmeca Compact i A-1
Chapter
Technical Manual
A
GENERAL & TECHNICAL DATA
1 WARNINGS AND CAUTIONS
WARNING
The unit contains live mains voltage parts. Always first turn off externally the
power to the unit before attempting to service the lift-motor, backrest motor, or
any parts inside the electronics control box.
Turning off the unit from its own mains switch DOES NOT cut off the mains
voltage from all internal nodes.
NOTE ELECTRICAL SAFETY
Always replace the fuses with ones of the same type and rating. Otherwise
patient, operator or equipment safety cannot be guaranteed. Please see fuse
label on left side of control box for fuse ratings.
CIRCUIT BOARDS
The circuit boards in the unit can be damaged by static electricity and require
special handling and antistatic packaging materials to be used both during
handling and shipping. See page A-7 for handling details.
NOTE GENERAL SAFETY
The unit must be serviced by qualified personnel only, trained by PLANMECA
or approved dealers. Repairs and parts replaced by unqualified personnel
carry no warranty.
Periodic maintenance as described in this manual must be performed on a reg-
ular basis.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planmeca Compact I and is the answer not in the manual?

Planmeca Compact I Specifications

General IconGeneral
SpittoonYes
Operating LightLED
Imaging TechnologyDigital
X-ray Tube Voltage60-70 kV
X-ray Tube Current7 mA
Focal Spot Size0.8 mm
Exposure Time Range3.2 s
Power Supply50/60 Hz

Related product manuals