Need help?Do you have a question about the Planmeca ProMax 3D Plus and is the answer not in the manual?
General| Imaging Technology | Cone Beam Computed Tomography (CBCT) |
|---|---|
| Dimensions | varies by configuration |
| Weight | varies by configuration |
| Sensor Type | Flat panel detector |
| CBCT Volume Sizes | Multiple volumes available, ranging from small localized areas to full skull coverage |
| Voxel Size | 75 μm to 400 μm (depending on the resolution mode and volume size) |
| Radiation Dose | low dose |
| Software | Planmeca Romexis |
| X-ray Tube Current | 3-15 mA |
| Detector Type | Flat Panel Detector |
| Scan Time | varies by scan mode |
| X-ray Tube Voltage | 60-90 kV |
Instructions for powering on the X-ray unit.
Instructions for powering on the 3D reconstruction PC.
Information about the different types of sensors available for the unit.
Explanation of the exposure switch operation and indicator lights.
Instructions on how to use the emergency stop button to halt unit operation.
Overview of the touch screen interface, its functions and notes.
Explanation of controls used for positioning the patient.
Steps to prepare the X-ray system, including sensor and patient support attachment.
Guidelines for preparing the patient before the exposure.
The procedure for performing a 3D exposure and capturing images.
The procedure for capturing the 3D face photo.
To Next Page
